DE plant Deionizer plant Demineralizing plant|Deionizer plant DE plant Demineralizing plant|DE plant|Demineralizing plant|DE-IONIZER PLANT

A.Demineralizing plant product description

Deionized water: Deionized water prepared by non-heat treatment using ion exchange method, reverse osmosis method, ultrafiltration method, EDI electric desalination method. That is, deionized water refers to pure water after removing impurities in the form of ions. Deionized water is commonly referred to as "ultra-pure water" or "18 megohm water" in the semiconductor industry.

B.DE plant Deionizer plant Demineralizing plant design basis

Raw water:Brackish water with TDS 9000 ppm

Production capacity: 25000 litres/hr

Product water:for industry water

Voltage and frequency: 220V380V/415V/440V/   50-60 HZ

C.DE plant/DE-IONIZER PLANT control method  

Whole system use full automatically control model, both model can be exchanged accordingly. Sand filter with auto and manual back flush.The RO system automatic flushing at each start-up and shutdown. High water level auto stop, low water level auto start.Pump protected without water.Protected when no power, poor power, larger electrical current, leakage, short circuit.

D.Deionizer plant DE plant Demineralizing plant process flow

Source tank →Feed water pump→ Muti-media filter(sands filter)→ Active carbon filter→ Water softener（or inhibitor dosing）→Cartridge/Security/Micro filter→High-pressure/Centrifugal pump→ Reverse Osmosis system→ RO purified  tank

E:Why need to provide the source water quality report? 

1.The source water quality report can help engineers better understand the parameters of various indicators n the raw water, like the amount of all kinds of ions, bacteria, etc. Provide feasibility solution based on various parameter of raw water.

2. TDS(Total dissolved solid) and residual chlorine value is very import. before designing the proposal, engineers select high different pressure pumps with different pressures based on TDS value to make sure that the system can produce the clean water normally. Select the appropriate stainless steel material based on the residual chlorine to avoid the water leakage caused by corrosion.

3.From water analysis report can see the iron and manganese, turbidity, bacteria whether exceed the standard. Engineers can design the process flow chart and solution which best fit the demand to help reduce unnecessary expense which can help customers save the cost.

4. Engineers design the DE plant Deionizer plant Demineralizing plant suitable proposal based on raw water quality report and product water purpose/standard which can operate normally and best fit the customer demand.

BTW: If source water is municipal tap water or clean reservoir water or spring water no need report.

But please inform us the water characteristic.

Please contact us!

Email: Sales@seawaterroplants.com

Mob&WhatsApp&WhatChat: +8613922972795

Demineralizing plant based on different capacity and treated water standard or purpose. we will supply the Optimization solution for client.