Remove iron from well water supplier

Iron in the water affects the tastes of foods and beverages, can contribute to the block-age of pipes, and can cause many other unwanted problems. Since it has so many undesirable properties, iron removal is an important phase of water treatment.

Remove iron from well water supplier

Due to iron will corrosive the stainless. Hence usually do not use stainless steel press vessel. Normally use the FRP pressure vessel and carbon steel(with inner with epoxy resin) pressure vessel.

Remove iron from well water made by FRP prevessel use Manual operation  

The iron manganese filtration system consists of one or more standard high-speed filtration units. The water flows through the internal water distributor and the water collector.With different media. it can effectively removal iron and manganese particulate matter and reduce turbidity. There are load in specific material, such as manganese sand,activated carbon, anthracite, etc.corresponding organic matter and ions can be adsorbed and removed. The material usually use FRP and carbon steel.

Remove iron from well water by electrical valves operation carbon steel 

· The filter unit is available in a variety of sizes from 16" (400mm) to 96" (2400mm) with different installation type.The filter can be used as an independent filtration system,with the water pump in the existing process,if it is used as a bypass filter,it can also be equipped with its own pump. The filter can also be installed on a common pipe with multiple processing units.

· This can achieve unlimited filtering capabilities of this system.The back washing of the filtration system is manual,semi- automatic and automatic,which can be started by manual button, PLC and pressure difference.The backwash cycle and backwash time are adjustable and are set to 3-5 minutes before delivery.This control is implemented by the automatic filter control system.Users can also choose PLC control system, which can be realized high-demand control such as centralized or remote communication.

Remove iron from well water plant capacity/flow rate.

The capacity from 1000L/hr to 200m3/hr. And it is customized capacity based on the well water content of iron and manganese.

In order to make the correct design proposal for user. Please make the well water quality report.

Please let us know as much information as possible so that we can make the best plan for you.

Except use remove iron from well water process achieve user requirement.

Any other Iron manganese remove filtration from underground water information

Please add Wechat/Whatapp +8613922972795.

Or send Email: sales@seawaterroplants.com