DE-IONIZED WATER PLANT | RO+DEIONIZATION PLANT 4000Liter per hour

1. DE-IONIZED WATER PLANT | RO+DEIONIZATION used for which industries?

It can be widely used in electric power, High pressure boiler feed water, electronics, medicine, chemical industry, food and laboratory fields. It is a green revolution in water treatment technology. The effluent quality has the best stability.

2.DE-IONIZED WATER PLANT | RO+DEIONIZATION normal flow chart/process:

Raw Water--> Multimedia Filter--> Activated Carbon Filter--> 1st pass Reverse Osmosis -->2nd pass Reverse Osmosis --> EDI module--> Polishing mixed bed -->Product Water( Resistivity 18 mΩ).

3.Different user have difference output DI water quality requirement? And the process also is difference.

1.Source water tank →Pretreatment parts→ Single RO system→ RO tank→EDI system →DM water→10MΩ/cm outlet water.

2.Source water tank →Pretreatment parts→ Doulbe RO system→Double RO tank→EDI system →DM water→15MΩ/cm outlet water

3. Source water tank →Pretreatment parts→ Doulbe RO system→Double RO tank→EDI system →Polish resin filter→ 18 MΩ/cmoutlet water

4.Source water tank →Pretreatment parts→ Cation resin →Anion resin →Middle tank→Mixed bed →DM water→15MΩ/cmoutlet water 

4. RO DE-IONIZED WATER PLANT normal parameter as below:

1. Design basic：

Water temperature：2—45℃, TDS96, PH 7.6

Feed water pressure：0.3—0.4Mpa

production capacity:4000L/hr

Voltage and Frequency: 380V/50hz 3 phase

Recovery rate: 60%-80%.

Output water quality: Resistivity > 18.2 Mega 

2. Client should supply basic condition：

Required floor smooth, floor ground should have drain trench.

Site water supply ability  water quality basic steady, pressure steady，feeding water pressure no less than 0.3MPa.

3.Control method:

Whole system use full/semi automatically control model, both model can be exchanged accordingly. Sand Carbon filter & water softener with auto and manual back flush. The system automatic flushing at each start up and shutdown. High water level auto stop, low water level auto start. Pump protected without water.

Protected when no power, poor power, larger electrical current, leakage, short circuit.

4. Process flow:

Source water tank →Feed water pump →Sands filter→ Active carbon filter →Water softener →Cartridge filter→Double RO system→EDI device →DI tank

5.RO DE-IONIZED WATER PLANT detail list for 4000L/hr 

DE-IONIZED WATER PLANT | RO+DEIONIZATION we need below information so that we can make the correct design proposal.

1. The source water from Municipal tap water. Well water(Better have water quality analysis report) or other source water?

2. There are different after treated water:

     A. Water resistivity at 5 mΩ,  10 mΩ- cm(Mega Ohm)

     B. Water resistivity at 15mΩ,   18mΩ- cm

3. How many liter water per hour?

4. Power is 380V/50hz or 60hz?

5. User need any Europe/USA brand or accept equal quality Chinese brand?

6. Any other detail requirement let us know.

Please let us know as much information as possible so that we can make the best plan for you.

Except use EDI Electro deionization process achieve user requirement.

There are RO+ Ion exchange resin process also can achieve user requirement.

Please add Wechat/Whatapp +8613922972795.

Or send Email: sales@seawaterroplants.com